This feature is only available on some models.
Refrigerating Icon
Temperature Display
Super Cool/Freeze Icon
Fruit/Vegetable Icon
Temperature Up Button
Temp. Control
Temperature zone selection button
Temperature Down Button
Freezer Icon
Meat Icon
Drink Icon
Fresh Switch
Press the button to adjust the setting temperature of the various temperature compartment.
LOCK
Lock/Unlock Button
Display
Operation instructions
When the fridge is turned on, the display screen lights up for 3 seconds and the alarm sounds.
The default fridge and freezer temperatures are 4 ℃ and -18 ℃.
When the error occurs, the display shows the error code (refer to the Error Indication section).
Under normal circumstances, if there is no operation on the display panel or door opening action within 30 seconds, then the display is locked.
This locks the buttons on the control panel.
To lock the control panel buttons, press and hold the LOCK button l for 3 seconds in the unlocked state until the function is activated.
To disable the function, press and hold the LOCK button l for 3 seconds until the function is deactivated.
Press the Temp. Control button to choose the setting temperature zone of the refrigerating compartment, and then press J or K to adjust the setting temperature of the refrigerating compartment.
The temperature setting range for the refrigerating compartment is between 2 ℃ and 8 ℃.
Press the Temp. Control button to choose the setting temperature zone of the freezer compartment, and then press J or K to adjust the setting temperature of the freezer compartment.
The temperature setting range for the freezer compartment is between -24 ℃ and -16 ℃.
Press the Fresh Switch button to adjust the setting temperature of the compartment.
Fruit/Vegetable: suitable for storing all kinds of fruits and vegetables
Drink: suitable for storing dry goods and drinks
Meat: suitable for a small amount of meat stored for 1-2 days
Super Cool mode
To set the Super Cool mode, press the temperature down button (K) after the temperature of the refrigeration compartment is adjusted to 2 ℃. In the Super Cool mode, the temperature of the refrigerating compartment is automatically set to 2 ℃.
The Super Cool mode automatically exits after 6 hours. To disable the mode manually, press the temperature up button (J). After exiting the Super Cool mode, the temperature of the refrigeration compartment will automatically return to the temperature set before the mode.
Super Freeze mode
This function can quickly freeze a large amount of ice or frozen foods.
To set the Super Freeze mode, press the temperature down button (K) after the temperature of the freezer compartment is adjusted to -24 ℃. In the Super Freeze mode, the temperature of the freezer compartment is automatically set to -24 ℃.
The Super Freeze mode automatically exits after 43 hours. To disable the mode manually, press the temperature up button (J). After exiting the Super Freeze mode, the temperature of the freezer compartment will automatically return to the temperature set before the mode.
To set the Shabbath mode, unlock the fridge, and then press the K button and the LOCK button at the same time for 4 seconds.
To disable the mode, press any button to exit.
In Shabbath mode:
Control control and lights remain off, and the alarm is disabled.
The fridge cools normally.
Compressor and fan motor status does not change within five minutes of the door opening.
The appliance can automatically detect problems during the operation.
If a problem is detected, the appliance may not operate and an error code is displayed even when any button is pressed.
If an error code is indicated on the display, do not turn off the power. Immediately contact the LG Electronics customer information centre and report the error code. If you turn off the power, the repair technician from the our information centre may have difficulty finding the problem.
Error Code | Description |
|---|---|
E1 | Temperature sensor failure in the fridge compartment |
E2 | Temperature sensor failure in the freezer compartment |
E3 | Temperature sensor failure in the variable temperature compartment |
E4 | Defrosting sensor failure in the fridge compartment |
E5 | Freezing defrost sensor detection circuit error |
E6 | Communication Error |
E7 | Circulation of temperature detection circuit error |
EH | Moisture sensor error |
For optimal food preservation, increasing or decreasing 1 °C from the default temperature is recommended for each compartment.
The control panel automatically turns off for energy saving.
If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.
The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.
In the event of a power outage, the operating state is immediately locked and remains until connecting the power again.