Top > OPERATION > Control Panel and Remote Control > Overviews

Overviews

Control Panel

Remote Control

Type 1

Type 2

Note

  • Features may change depending on the model type.

  1. Power

    Press to turn the air conditioner ON or OFF.

  2. Sleep

    This mode keeps operating noise to a minimum and turns the air conditioner off after a set time. The timer can be set from 1 to 7 hours.

    • In the Cool, Dry Mode setting temperature increases by 1 7 after 30 minutes and additional 1 7 after another 30 minutes for a more comfortable sleep.

    • The setting temperature increases up to 2 7 from the preset temperature.

  3. Timer

    • Delay ON

      When the air conditioner is off, set it to automatically turn on from 1 to 24 hours later, at its previous mode and fan settings.

    • Delay OFF

      When the air conditioner is on, set it to automatically turn off from 1 to 24 hours later.

    Note

    • Each press of the Timer button advances the timer by 1 hour. After the last press the display returns to the temperature setting.

  4. Mode

    Press the Mode button to cycle between 3 types of air conditioner operation: Cool / Fan / Dry.

    • Cool

      This mode is ideal on hot days to cool and dehumidify the room quickly. Use the Temp J, K buttons to set the target room temperature and use the Fan Speed button to set the desired fan circulation speed.

    • Fan

      In this mode the fan circulates air but the compressor does not run. Use the Fan Speed button to set fan speed to High, Medium or Low. In this mode, you cannot adjust the set temperature.

    • Dry

      This mode is ideal for rainy and damp days to dehumidify the room rather than cooling it significantly. Humidity is reduced from the room by the combination of compressor operation and the fan speed fixed at Low. The compressor and fan turn off once the set temperature is reached. Fan speed cannot be adjusted in Dry mode.

  5. Wi-Fi (Wi-Fi Model Only)

    Enables connection of the air conditioner to a home Wi-Fi network.

    Remote Type 1

    Press and hold the Mode d and Fan Speed g buttons simultaneously for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.

    Remote Type 2

    Press the Power a button on remote control for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.

    Note

    • Follow instructions on LG ThinQ application on how to connect to your unit.

    • To disconnect the appliance from LG ThinQ, press the Power a and Fan Speed g buttons simultaneously for 3 seconds.

  6. Clean Filter

    The Clean Filter LED lights up to notify you that the filter needs to be cleaned. After cleaning the filter, press Temp J and K together on the control panel to turn off the Clean Filter light.

    Note

    • The filter reset must be done using the control panel, not the remote control.

    • This feature is a reminder to clean the air filter for more efficient operation. The LED light turns on after 250 hours of operation.

  7. Fan Speed

    Press to set the fan speed to Low (F1), Medium (F2) or High (F3). Also set the Diagnosis if held for 5 seconds (For remote type 2).

  8. Temp

    The thermostat monitors room temperature to maintain the target temperature. The thermostat can be set between 16 7 - 30 7 (60 8 – 86 8). Press J or K arrows to increase or decrease the temperature setting.

  9. 4-in-1

    Press 4-in-1 button repeatedly to select each step.

    Note

    • 1 step : The power Input is decreased by 20% compared to rated power input.

      • 8O is displayed on the display screen.

    • 2 step : The power Input is decreased by 40% compared to rated power input.

      • 6O is displayed on the display screen.

    • 3 step : The power Input is decreased by 60% compared to rated power input.

      • 4O is displayed on the display screen.

    • This function is available with Cooling Mode.

    • Capacity may decrease when 4-in-1 modes is selected.

    • target temperature is displayed about 5 seconds if you press Fan Speed, J or K button.

  10. Clear

    Cancel Sleep and Timer settings. Also set the Diagnosis if held for 5 seconds (For remote type 1).

Note

  • Auto Restart : If the air conditioner turns off due to a power outage, it will restart automatically once the power is restored, with the same settings as were set before the unit turned off.

  • The remote control will not function properly if the AC infrared sensor is exposed to direct light or if there are obstacles between the remote controller and the air conditioner.

  • Default temperature will be minimum 24 7 (in cooling cycle), when operated with remote control except power failure/power switched off.