Adjusting the Levelling Leg

The appliance has two front leveling legs. Adjust the legs to alter the tilt from front-to-back or side-to side. If the appliance seems unsteady or the doors do not close easily, adjust the appliance’s tilt, using the instructions below:

• Turn the leveling leg to the left to raise that side of the appliance or to the right to lower it. It may take several turns of the leveling leg to adjust the tilt of the appliance.

  Note

  • A flare nut wrench works best, but an open-end wrench will suffice. Do not over-tighten.

  

• Open both doors, and check to make sure that they close easily. If the doors do not close easily, tilt the appliance slightly more to the rear by turning both leveling legs to the left. It may take several more turns, and be sure to turn both leveling legs the same amount.