Replacing the Water Filter
Process of Purification
- Drinking water
Step 1 a
Out sediment filter
Remove big particles, rust stains, mud etc.
Step 2 b
Sedi + HMR carbon filter
Remove unseen dregs, other contamination and invisible fine particles.
Removes heavy metals*1: arsenic, lead, cadmium, copper, chromium, iron and mercury.
Step 3 c
Ultra filtration filter
Removes only bacteria and fine particles substance.
Step 4 d
Virus clean+ filter
Removes Virus. (MS-2 Phage)*1
This feature is as per 3rd party testing in accordance with applicable standards.
Filter Replacement Period
The filter replacement period refers to the period that the purification performance of the filter is maintained. And the replacement period is lesser in the case of a place with poor water quality or a large purification amount.
Filter name | Recommended purification amount (in litres)*1 |
|---|---|
Out sediment filter | 3000 |
Sedi + HMR carbon filter | 3000 |
Ultra filtration filter | 6000 |
Virus clean+ filter | 6000 |
This is as per LGEIL standard.
Filter replacement and /or AMC request can only be placed via calling LG customer care (refer last page).
Warranty shall be void in case of use of counterfeit (duplicate) filters or replacement of filters from unauthorized sources.
Using counterfeit filters or procuring filters from unauthorized sources may negatively impact or degrade product performance and product life. It may not be safe drinking water and may also impact user's health.
LG shall not be responsible for any damage arising directly or indirectly out of any defect being noticed in the product due to usage of such counterfeit filters.
Out sediment filter may get choked in abnormal turbidity (sand and mud) condition, it is suggested to switch ON water purifier after 1-2 hour of overhead tank filling so that sand/mud will get settled. Out sediment filter should be cleaned regularly to prevent choking in above condition for better performance.
If you wish to replace the filter, contact LG electronics customer care.
After replacing the filter, check if there is a leak from the product.
After installation, dispense water for the first time when water tank is full. Same process is to be followed after every filter change or digital sterilization. Approximate time taken to fill the tank to the fullest is 1 hour, depending on water pressure, temperature etc.
There is no impact on TDS of water.