Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

*1

This feature is only available on some models.

Control Panel

Dispenser Control Panel

  1. Ice On/Off

    Press and hold the Ice On/Off button for three seconds to turn the automatic icemaker On/Off.

  2. Express Freeze

    This function can quickly freeze a large amount of ice or frozen foods.

    • Press the Express Freeze button to activate the function for 24 hours. The function automatically shuts off after 24 hours.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  3. Freezer

    Press this button repeatedly to select a desired temperature between -23 °C and -15 °C.

    • The default freezer temperature is -18 °C.

  4. Fridge

    Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.

    • The default fridge temperature is 3 °C.

    Note

    • The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

  5. Water Filter*1

    Replace the water filter when the indicator light turns on.

  6. Express Cool

    This function can quickly cool a large amount of foods such as vegetable, fruit and so on.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  7. Self Care*1

    UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes every hour or can be manually activated at anytime.

    Press this button to activate it manually.

    Note

    • This function will momentarily stop each time the Water button is pressed if it is in operation and will resume the function after 1 hour.

    • This function runs automatically for 10 minutes every hour without pressing the Self Care button.

    • When UV clean function is activated the LED on the dispenser control panel lights up.

      • This feature is only available on some models.

    • UVnano is a compound word derived from the words UV and its unit, nanometer.

  8. Wi-Fi

    This button allows the appliance to connect to a home Wi-Fi network. Refer to Smart Functions for information on the initial setup of the LG ThinQ application.

  9. Non Plumbing*1

    The Non Plumbing icon is illuminated when the water dispenser tank is installed correctly.

  10. Water & Ice Type*1

    Select the desired dispenser mode from the buttons on the dispenser control panel. Press the dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.

Note

  • The displayed temperature is the target temperature, and not the actual temperature inside the appliance.

  • The actual temperature inside the appliance depends on the following factors: room temperature, the amount of food and how often the doors are opened, where the appliance is. Set the temperatures by considering these factors.

  • If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.

  • This appliance incorporates an earth connection for functional purposes only.