Your washer includes several additional cycle options to customize cycles to meet your individual needs.
Select the desired option after selecting the desired cycle and settings.
The LED for the option will light when the option is selected.
To protect your garments, not every option is available with every cycle.
A chime will sound twice and the LED will not light if the selected option is not allowed for the selected cycle.
Spin Only
Use this option to spin clothes and drain the water from the tub.Use this option to drain water if the wash cycle is interrupted by a power failure or to spin dry hand-washed items.Press the Power button to turn on the washer.Do not select a cycle.Press and hold the Spin button for 3 seconds.You can change the spin speed by pressing the Spin button.Press the Start/Pause button to begin.
Cold Wash
Use this option to save energy by using cooler water while increasing the wash and rinse times to maintain wash performance.Wash time will increase up to several minutes with this option.For best wash results, only wash small loads (less than 8 lb) with this option.
Delay Wash
Once you have selected the cycle and other settings, press this button to delay the start of the wash cycle.Each press of the button increases the delay time by 1 hour, for up to 19 hours.Once the desired delay time is set, press the Start/Pause button to start the delay time.If the Start/Pause button is not pressed to begin the delay time, the washer automatically turns off after a certain time and all cycle settings are lost.
Water Plus
Use this option to add extra water to the wash cycle for better wash performance with large or bulky items.If the washer reaches its maximum water level, this button will have no effect.To add more water while a cycle is running, pause the cycle and select this option.When you select Normal cycle and Water Plus option, the cycle will be changed to Deep Wash cycle before starting.
Signal
The washer plays a melody when the wash cycle is finished. The buttons make a sound each time they are pressed.Press the Signal button to turn the sounds on or off.When no signal is heard, the signal is off. The signal can be turned on at any time as long as the washer is turned on.
Extra Rinse
This option adds an extra rinse to the selected cycle. Use this option to help ensure the removal of detergent or bleach residue from fabrics.Pressing the Extra Rinse button twice will add two additional rinses to the cycle.If a liquid fabric softener is used, it is always dispensed in the final rinse.You cannot select this option with the Spin Only option and Tub Clean cycle.Selecting the Extra Rinse option with the Normal cycle automatically changes the cycle to the Deep Wash cycle.
Turbo WashTM
Adding this option reduces the cycle time while still providing similar wash performance to the same cycle without Turbo WashTM.This option cannot be used with all cycles.
Control Lock
Use this function to disable the controls. This function can prevent children from changing cycles or operating this washer.The function does not lock the door.Once this function is set, all buttons are locked except the Power button.When the controls are locked, CL and the remaining time are alternately shown on the display during the wash cycle.Turning off the power will not reset this function. You must deactivate this function before you can access any other options and functions.Turn on the power.Press and hold the Signal button for 3 seconds to activate this function.Turn on the power.Press and hold the Signal button for 3 seconds to deactivate this function.When this function is deactivated, a chime will sound and the remaining time for the current cycle will reappear on the display.