Use this function to delay ending time. The appliance will start automatically and finish after a specified time interval.
Press the POWER button.
Select a washing programme.
Press the Time Delay button to set the required delay ending time.
Press the START/PAUSE button.
This function is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash laundry and other factors.
Each press of the button increases the delay time by 1 hour, for up to 19 hours.
If the START/PAUSE button is not pressed to begin the delay time, the washer automatically turns off after a certain time and all cycle settings are lost.
Use this option to save energy by using cooler water while increasing the wash and rinse times to maintain wash performance.
Wash time will increase up to several minutes with this option.
Selecting this option increases the water supplied during rinsing. The water supplied during washing is not increased.
For best wash results, only wash small loads (less than 3.7 kg) with this option.