Cleaning the Dispenser Drawer
Detergent and fabric softener may build up in the dispenser drawer. Remove the drawer and inserts and check for buildup once or twice a month.
Do not spray water inside the washer. Doing so may cause fire or electric shock.
Turn off the washer, and unplug the power cord.
Slide the drawer straight out until it stops. Press the button at the back of the drawer, lift the front of the drawer, and pull the drawer completely out.
Remove the insert from the compartment.
Clean the inserts and drawer with warm water.
Use a soft cloth or brush to clean and remove any residue.
Do not use soap when cleaning the drawer and inserts.
Wipe off any moisture with a dry towel or cloth after cleaning.
To clean the drawer opening, use a small, non-metal brush to clean the recess. Remove all residue from the upper and lower parts of the recess.
Return the inserts to the proper compartments and replace the drawer.
Hold the drawer with the front raised and angle the rail stops past the opening. Then lower the drawer into place. Hold the drawer by the front corners and push it in firmly until the rail stops snap into place. Then slide the drawer in completely.