Removing/Refitting the Water Dispenser

• Take out the middle door basket.

• Hold the two sides of the water tank tightly, then pull up the water tank by shaking up and down.

  

• Unscrew the head a, then clean it and the inside of water tank.

  

• Insert the head into the hole.

  Caution

  • Be careful not to press on the head.

  • When fitting the water tank, ensure that the head is inserted into the hole first.

  Note

  • Before assembling, drain the water inside the tank, and check whether the washer is reversed or not.

• Fit the tank along the guides b on the door.

  

• Press down two sides of the tank.

  

  Note

  • When you hear a click sound, that means the installation is completed.