Top > OPERATION > Control Panel > Control Panel Features

Control Panel Features

  1. Power Button

    • Press the button to turn the appliance on. Press again to turn the appliance off.

      Note

      • Pressing the Power button during a cycle will cancel that cycle, and any load settings will be lost.

  2. Cycle Selector Knob

    • Turn this knob to select the desired cycle. Once the desired cycle has been selected, the standard presets will be shown in the display. On Manual Dry cycles, these settings can be adjusted using the cycle modifier buttons anytime before starting the cycle.

  3. Start/Pause Button

    • Press this button to start the selected cycle. If the appliance is running, use this button to pause the cycle without losing the current settings.

      Note

      • If you do not press the Start/Pause button to resume a cycle within a certain time, the appliance turns off automatically and all cycle settings are lost.

  4. Extra Options and Functions / Cycle Modifier Buttons

    • Use these buttons to select the desired options for the selected cycle. Not all options are available for each cycle.

  5. Time and Status Display

    • The display shows the settings, estimated time remaining, options, and status messages for the appliance. When the appliance is turned on, the default settings in the display will illuminate.

Time and Status Display

  1. Clean Filter Reminder

    • The Clean Filter indicator lights up at the beginning of the cycle to remind you to check the lint filter. It turns off when the Start/Pause button is pressed.

  2. Cycle Status Indicators

    • Dry lights up when the appliance is in the drying stage.

    • Cool lights up when the appliance is in the cool down stage.

  3. Estimated Time Remaining

    • When a drying cycle is selected, the estimated drying time for the selected cycle is displayed. This time will change if you select extra options for the cycle.

    • The cycle time on Sensor Dry cycles may fluctuate as the appliance recalculates drying time for optimal results.

  4. Flow Sense Indicator

    • The Flow SenseTM duct blockage sensing system detects and alerts you to blockages in the ductwork that reduce exhaust flow from the dryer. Maintaining a clean exhaust system improves operating efficiency and helps minimize service calls, saving you money.

  5. Control Lock lights up when the control panel is locked.

  6. Damp Dry Signal lights up when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while they are still slightly damp.