Top > INSTALLATION > Final Installation Check > Installation Check Error Codes

Installation Check Error Codes

Refer to the chart below before calling for service.

Error Code

Possible Cause and Solution

OE

Drain hose is kinked or pinched.

  • Feed the drain and water supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.

Drain hose is connected to the disposal without removing the knockout plug.

  • Remove the knockout plug from the disposal.

Waste tee or disposal is clogged.

  • Remove knockout plug on the waste tee or disposal.

IE

Water supply line is kinked under dishwasher.

  • Feed the drain and water supply hoses through the hole under the sink. Then gradually slide the dishwasher into the cabinet while pulling on the hoses under the sink to take up any slack. This helps avoid kinking the hoses or trapping them beneath the dishwasher.

House water supply is not turned on.

  • Turn the water faucet on.