Thawing out the appliance manually

• Open the dryer's door and pull out both inner and outer filter.

• Pour 1 litre of hot water at 60 ℃ into the lint filter compartment and then reinsert the both lint filters.

  Caution

  • Pouring more that 1.5 litres of water into the compartment will cause water to leak back out.

  • Pouring hot water over 60 ℃ will cause malfunctions to the appliance or burn.

  

• Turn on the appliance and operate the Cotton programme about 30 seconds. Then wait about 30 minutes.

• Operate the Cotton programme again. Check if the OE message will appear or Empty Water indicator will light up within 10 minutes after operating the appliance.

  • When the OE message or Empty Water indicator appears go to step 2 and repeat procedure.

  • Nothing appears on the display when the thawing is done.

• Dry the clothes as usual.