dE1
DOOR ERROR
The door has been opened while the appliance is in operation or the appliance is being operated without the door being closed properly.
Close the door completely.
If dE1 is not released, call for service.
dEz / dE4
DOOR ERROR
Door switch detection is not working properly.
Unplug the power plug and call for service.
tE1 / tEz / tE4 / tEs / tE6
TEMPERATURE ERROR
Temperature Sensor has malfunctioned.
Unplug the power plug and call for service.
FI
TEMPERATURE ERROR
The temperature inside the drum has risen suddenly.
Unplug the power plug and call for service.
LE
The amount of clothes exceeds the maximum load capacity.
Unplug the power plug and call for service.
LE1
MOTOR LOCKED ERROR
The motor has stopped suddenly.
Check if the amount of clothes exceeds the maximum load capacity.
Unplug the power plug and call for service.
LEz / AE
COMPRESSOR ERROR
The compressor has stopped suddenly.
Unplug the power plug and call for service.
LE3
FAN MOTOR ERROR
The fan motor has stopped suddenly.
Unplug the power plug and call for service.
OE
DRAIN PUMP ERROR
The drain pump motor has malfunctioned.
Unplug the power plug and call for service.
The surrounding temperature for installation is below zero.
The recommended surrounding temperature for installation is 5 - 35 ℃.
1F
NONE LINT FILTER ERROR
The lint filter is not in the appliance.
Insert the lint filter.
CL
Child Lock
The Child Lock function is on to prevent anyone from changing cycles or operating the appliance.
Turn off the Child Lock function in the control panel. See Child Lock under Options and Extra Functions.
[=] ~ ENd
This is how the Anti Crease option works.
Make sure that the Anti Crease option has been set. The option is designed to prevent creases that are formed when the clothes are not unloaded promptly after the drying cycle. When the option is set, the appliance runs for 10 seconds and pauses for 5 minutes. The option is works for up to 2 hours.
Press the Power button and unload the clothes.