Connecting to the Power Supply

Plug the washer into a 120 VAC, 60 Hz grounded 3-prong outlet.Do not use a worn or damaged power cord or power plug. Replace or repair it immediately. Failure to do so may result in death, fire, electric shock, or malfunction.Do not modify the power cord and plug provided with the appliance. Do not damage it when installing or moving the appliance. Doing so may result in death, fire, electric shock, or malfunction.Make sure that the appliance is grounded.Connect this appliance to a grounded outlet conforming to the rating prior to use. Failure to do so may result in fire, electric shock, or malfunction.Do not damage or cut off the ground prong of the power cord. Doing so may cause death, fire, electric shock, or product malfunction.Improper connection of the equipment-grounding conductor can result in risk of electric shock. Check with a qualified electrician or service technician if you are in doubt as to whether the appliance is properly grounded. If it does not fit the outlet, have a proper outlet installed by a qualified electrician.The appliance and outlet must be positioned so that the plug is easily accessible.Do not use adapter or extension cords. Doing so may result in serious injury, fire, electric shock, or death.For best performance, plug the appliance into its own individual outlet. This helps prevent overloading house wiring circuits which could cause a fire hazard from overheated wires.If necessary, use a new, UL-listed 3-prong (grounding) plug rated at no less than the branch circuit. Do not use an extension cord longer than 3 feet. Failure to follow these warnings may result in serious injury, fire, electric shock, or death.

Installation Check Error Codes

Refer to the chart below before calling for service.Error CodeSolutionIEFully open the water faucet.Straighten out any kinks in the inlet hoses and make sure the hoses are not pinched against the wall or under the washer.OEStraighten out any kinks in the drain hose and make sure the hose is not pinched against the wall or under the washer.Remove and flush out the drain hose to remove clogs.Adjust or repair the drain. Maximum drain height is 96 inches.