Using a Standpipe to Drain

• Insert the end of the drain hose into the standpipe.

• Use the provided tie strap a to secure the drain hose in place.

  

• If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses with the provided tie strap b (ribbed side on inside).

  Caution

  • Do not insert the end of the drain hose into the standpipe more than 8 inches (20 cm). Doing so can cause siphoning, odors, or improper draining.

  Note

  • If the drain is large enough for the flange on the hose to fit inside, then do not insert the flange more than 1 - 2 inches into the drain.