Settings

• Press the Setting O button.

• Select the desired settings using Move 3 4 button and adjust them as needed.

  • Select Exit by pressing the Setting O button to reverts to the previous screen.

Default Suction Power

Select the suction power mode that operates when the product is turned on.

Screen Brightness During Charging

Adjust the brightness of the status display that displays the charge level when charging the product.

Charging Notification Sound

Adjdust the volume of the notification sound when the product is mounted on the charging station.

Battery Life Extension Mode

The i icon displays on the status display when the Battery Life Extension Mode is set. The mode can slow down the battery aging by limiting the battery charging level by 85 %. However, this mode only affects the battery which attached on the vaccum cleaner. The auxiliay battery are charged 100%.

Wi-Fi

Wi-Fi function can be turend on or off.

Wi-Fi Settings

Use this settings to check whether the product is connected to the network or to reconnect to the network.

• Not Connected

  • The Wi-Fi setting in the Setting Mode is Off.

  • The product is not connected with the LG ThinQ application eventhough the Wi-Fi setting is On.

  • Start the Wi-Fi connection by pressing the Setting O button.

• Connected

  • The Wi-Fi setting in the Setting Mode is On and the product is connected with the LG ThinQ application.

  • Reconnect the Wi-Fi by pressing the Setting O button.

• Disconnected

  • The product lost network connection when connected status.

  • Check the Wi-Fi network. If the product cannot connect to the network, change the the network using LG ThinQ application or reset Wi-Fi by pressing the Setting O button.

Reset Wi-Fi

Reset all Wi-Fi related settings of the product and disconnect the product from the network.

Auto Stop&Go

When you put the vacuum cleaner down to tidy up during cleaning, the vacuum cleaner automatically goes into standby mode to save energy. When you start cleaning again, it automatically starts suctioning without having to press the power button.

The standby mode remains for 5 minutes, after which the power turns off.

• This function is activated when the vacuum cleaner is completely placed on the floor. The function does not work when placed against a wall or chair.

• If the vacuum cleaner is used without a nozzle attached, this function will be deactivated if the vacuum cleaner moves.

• If the vacuum cleaner is used with a nozzle attached, this function will be deactivated if you hold the vacuum cleaner handle and lift it for more than 30 degrees.

• If you press the 3, 4 button on the vacuum cleaner, this function will be immediately deactivated.