You can customize the programmes by using the following options:
It allows you to reduce creases that are formed when the clothes are not unloaded promptly at the end of drying cycle.
When the option is turned on, a lamp indicated that the anti crease option is set, lights up and the appliance repeatedly runs for 10 seconds and pauses for 5 minutes. The option is turned off automatically after 2 hours at the end of drying cycle
To turn off the option, press the Anti Crease button before you start a drying cycle.
When the option is set, a symbol appears on the display until the feature is off.
When the option is set, only the Power button works after the drying cycle is end.
When a drying cycle is running, pause the cycle first to set the option.
Always turn off the appliance before unloading the clothes.
When this option is selected, the appliance signals when the load is approximately 80% dry. This allows you to remove faster-drying lightweight items or items that you would like to iron or hang while they are still slightly damp.
It allows you to delay the finishing time of the drying cycle from 3 hours to 19 hours.
Press the Power button.
Select a programme.
Press the Delay End button to schedule your appointment.
(For example, if it is currently 1 p.m. and you want to finish drying at 7.p.m, set it after 6 hours (7-1=6).)
Turn the knob to select desired reservation time and press the 8 button.
When the reservation function is set, the Delay End button will light up.
Press the Start/Pause to start the scheduled drying cycle.
If you want to modify the Delay End, pause it first and then press the Delay End button. After modifying the Delay End function, press the 8 button to save it and start it again.
Reservations can be made every 30 minutes from 3 to 19 hours, and reservations are not made for less than 3 hours.
The reservation time and the actual end time may vary depending on the amount of drying.
If you change the course by turning the operation dial after setting the reservation function, the reservation function is canceled.
If the power is turned off due to a power outage, the reservation will be canceled.
The Delay End function does not apply to the Condenser Care programme.