Using Live Playback (Real-time Playback)
It is a function you can use to temporarily save the program you are currently watching to a USB HDD, so you can play back any scenes you might miss while watching TV. This function allows you to continue watching from where you were previously if you go out for a while.
  1. Input the USB HDD in the USB port.
  2. Press the START LIVE PLAYBACK button left corner of the screen.
  3. While watching live broadcast use the pointer to select a point on the progress bar where you want to resume watching. You can also press the LeftLeft / RightRight buttons on your Remote Control to use this feature.
    Select a point before the current point on the progress bar.

Live PlaybackLive Playback

Select a device to be used with Live Playback when two or more USB HDDs are connected to the TV.
You cannot use a USB stick. Connect a USB HDD with 80 GB or more of total storage.
If there is not enough remaining space in the USB HDD, Live Playback may not work properly. To use the Live Playback function, you need the USB HDD which has at least 2.3 GB of free space.
It can be used in analog or digital broadcasting and in Input mode. However, you cannot use this option while listening to a radio channel.
(This feature is available on certain models only.)
Channels connected to the COMPONENT IN and HDMI IN are not supported Live Playback.
(COMPONENT IN port is available in certain models only.)
With the Live Playback function, you can play a program back for up to two hours depending on remaining USB HDD capacity. This time may vary depending on your region.
The videos saved in Live Playback mode are deleted if you turn off the TV without recording them.