Cooling, Heating, Dehumidification, Auto, Fan Mode
Turn on the appliance to control the operating mode.
Cooling Mode
This mode supplies cool air indoors.
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Cooling mode.
w is displayed on the display screen.
Press the g or h button to set the desired temperature.
Each press increases or decreases the temperature by 1 7.
You can set the temperature from 18 7 to 30 7.
The temperature range may change depending on the model.
The cooling mode doesn't work if the desired temperature is higher than the room temperature.
In this case, lower the desired temperature.
For best results, set the desired temperature to about 5 7 lower than the outside temperature.
If the desired temperature is higher than the room temperature, the vent will only blow out air rather than cooling.
Heating Mode (On Some Models)
It supplies warm wind to the indoor.
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Heating mode.
v is displayed on the display screen.
Press the g or h button to set the desired temperature.
Each press increases or decreases the temperature by 1 7.
You can set the temperature from 16 7 to 30 7.
The heating mode doesn't work if the desired temperature is lower than the room temperature.
If so, please increase the desired temperature.
For best results, set the desired temperature to about 5 7 higher than the outside temperature.
If the desired temperature is lower than the room temperature, the vent will only blow out air rather than heating.
What is the three-minute delay function?
It will take time for the product to blow warm air. The delay is to protect the compressor. The room will be heated with warm air after three minutes when the compressor begins operation.
Dehumidification Mode
This function reduces moisture in the air.
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Dehumidification mode.
q is displayed on the display screen.
Press the FAN SPEED button repeatedly to adjust the fan speed.
Auto Mode
This function adjusts the airflow automatically.
- Auto Operation Mode (On Some Models)
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Auto mode.
M is displayed on the display screen.
Press the g or h button to select the desired operation code if the temperature is higher or lower than the desired temperature.
Code
Description
2
The appliance sets the desired temperature to a level higher than the current temperature.
1
The appliance sets the desired temperature to a level slightly higher than the current temperature.
0
The appliance maintains the current temperature.
-1
The appliance sets the desired temperature to a level slightly lower than the current temperature.
-2
The appliance sets the desired temperature to a level lower than the current temperature.
Press the FAN SPEED button repeatedly to adjust the fan speed.
- Auto Changeover Mode (On Some Models)
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Auto mode.
M is displayed on the display screen.
Press the g or h button to set the desired temperature.
Each press increases or decreases the temperature by 1 7.
You can set the temperature from 16 7 to 30 7.
Press the FAN SPEED button repeatedly to adjust the fan speed.
The temperature range may change depending on the model.
It can be switched to another operating mode manually.
Fan Mode
This function circulates the air without heating or cooling it.
Turn the appliance on by pressing the s button.
Press the OPER MODE button repeatedly to select the Fan mode.
┌ is displayed on the display screen.
Press the FAN SPEED button repeatedly to adjust the fan speed.
Ventilation mode does not release cool wind but general fan.
The Fan mode simply circulates the air within the room without changing its temperature.