Connecting to the Water Tap
This feature is only available on some models.
Push the water tube into the hole of the tap connector supplied in the accessories. The pipe should be held firmly whilst the connector is pushed onto the pipe.
Ensure that the rubber washer is fitted to the inside of the tap connector before screwing it onto the tap.
A separate connector or adaptor may need to be purchased if your tap fitting does not match the thread size of the connector provided.
Only For Germany
Connect your appliance only to a water tap with a safety device (according to EN 1717) to avoid drinking water pollution through water backflow.
To be sure, please ask your installer. In case water tap is without backflow prevention valve (according to EN 1717), you have to use an extra backflow prevention valve compliant with German drinking water ordinance between water tap and water inlet hose.