Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

*1

This feature is only available on some models.

  1. Freezer

    Press this button repeatedly to select a desired temperature between -24 °C and -14 °C.

    • The initial freezer temperature is -19 °C.

  2. Dispenser

    Select a desired dispenser mode from the buttons on the control panel. Press the dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.

  3. Fridge

    Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.

    • The initial fridge temperature is 4 °C.

    Note
    • The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

  4. Express Freeze / Express Frz.

    This function can quickly freeze a large amount of ice or frozen foods.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  5. Lock

    This locks the buttons on the control panel.

    • To lock the control panel buttons, press and hold the Lock button for 3 seconds until the k icon appears and the function is activated.

    • To disable the function, press and hold the Lock button for 3 seconds until the l icon appears and the function is deactivated.

  6. Door Alarm*1

    This sets the alarm sound which is activated when the appliance door is opened.

  7. Filter*1

    This shows the replacement period of the water filter automatically.

    Note
    • After changing the filter, push and hold the Filter button for three seconds to reset the filter.

  8. Non Plumbing*1

    The Non Plumbing icon is illuminated when the water dispenser tank is installed correctly.

Note
  • For optimal food preservation, increasing or decreasing 1 °C from the default temperature is recommended for each compartment.

  • The control panel automatically turns off for energy saving.

  • If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.