Control Panel and Functions
Hot, Ambient and Cold Water Model | Hot and Ambient Water Model |
 |  |
Indicators
Indicator | Description |
|---|---|
 | The default indicator is 85 ℃. The indicator illuminates when a desired temperature is selected.
|
 | The number of indicator shows the coldness level:
After dispensing a lot of cold water, wait for the water to cold. |
 | The default indicator is 120 ml. The indicator illuminates when a desired volume is selected. |
 | The indicator lights up when the appliance is connected to Wi-Fi network at home. |
 | The indicator is orange as a warning that the filter will need to be changed soon. |
Dispensing Water
Place the bottle, pitcher or cooking pot below the water tap.
Select the water mode (Hot, Ambient, Cold Water) as need.
Hot Water: Press the Hot a button.
Ambient Water: Press the Ambient b button.
Cold Water: Press the Cold c button.
If necessary, you can customise the hot water temperature by pressing the Hot a button. The default hot water temperature is 85 ℃.
The hot water temperature can be customised only by the Hot a button.
If necessary, you can customise the volume of water by pressing the Volume d button. The default volume is 120 ml.
The dispensed volume of water may vary depending on the installation environment.
Press the Dispensing f button. Once the desired fill level is achieved, release Dispensing f the button.
If you do not press the Dispensing f button within 5 seconds after pressing the Hot a button, it will go back to previous selection. (Cold/Ambient water)
If hot water is dispensed for longer than desired, press any button to stop dispensing.
Dispensing Ambient or Cold Water Continuously
Place the bottle, pitcher or cooking pot below the water tap.
Select the water mode (Ambient or Cold Water) as need.
Ambient Water: Press the Ambient b button.
Cold Water: Press the Cold c button.
Press the Cont. e button to dispense water continuously up to 3 minutes.
Press the Dispensing f button. Once the desired fill level is achieved, release Dispensing f the button.
This function is only available for cold water/ambient water for safety, not hot water.
Lock/Unlock Hot Water
To lock the hot water, press the Hot a button for 3 seconds. Then, hot water is not dispensed.
To unlock the hot water, press the Hot a button for 3 seconds. Then, hot water is dispensed.
Activating/Deactivating the Wi-Fi
Press the Ambient b button for 3 seconds to initiate the connection of the appliance to the LG ThinQ application.
Refer to SMART FUNCTIONS for information on the initial setup of the LG ThinQ application.
The control panel will turn off automatically for energy saving.
If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.