Using the Recording Functions
With the LG webOS TV, you can use recording functions.
Using Instant Recording
  1. Connect a USB HDD or USB stick to a USB port.
    It is recommended that you record to a USB HDD.
  2. While watching a live broadcast press the Wheel (OK) button.
  3. Press the Start RecordingStart Recording button left corner of the screen.
  4. If you want to stop the recording press the Stop RecordingStop Recording button.

Recording screenRecording screen

Matters that require attention when Recording
While recording, press the Wheel (OK) button to display information about the recording.
You can set recording time before the recording starts, and during the recording you can change the time by selecting the Record button.
If multiple USB storage devices are connected, the last recorded storage device is selected automatically.
The available capacity of the USB HDD partition must be at least 1 GB.
There must be at least 4 GB of partition size on USB stick.
The recordable time may vary depending upon the capacity of your USB storage device.
When the USB stick is used for its first recording; the TV goes through a performance test. You can record only when the test is complete.
Because of the content protection technology used, the recorded video cannot be played on PCs or other TV models. Also, the video cannot be played if the TV’s video circuit is replaced.
Do not remove the USB cable while recording.
If you force your TV to power off while recording, the recorded content may not be saved. Ideally, you should stop the recording and check that the channel has been recorded before turning the TV off.
If a USB storage device is faulty, recording may not be completed properly.
USB storage device may not work or function properly when a USB hub or extension cable is used.
The storage device may be used for purposes other than recording, so recording may be interrupted due to a lack of space on the device. Use of a storage device with sufficient space for recording is recommended.
During recording, you can watch the other channels or use the other functions. However, you can’t watch the analog channels while an analog channel is recording.
(This function is available on certain models or in certain countries only.)
The configurable items differ depending upon model.
Some functions may not be available while recording is in progress.
Channels connected to the COMPONENT IN and HDMI IN are not recorded when recording via Input.
(COMPONENT IN port is available in certain models only.)
Bluetooth and the USB port may not work properly when recording with a USB storage device.
Recordings that are less than 10 seconds long will not be saved.
You can save up to 600 pieces of content on a single partition.