Top > OPERATION > Control Panel > Control Panel Features

Control Panel Features

  1. Refrigerator

    Indicates the set temperature of the refrigerator compartment in Celsius (°C) or Fahrenheit (°F). The default refrigerator temperature is 37 °F (3 °C). Press the Refrigerator button repeatedly to select a new set temperature from 33 °F to 43 °F (1 °C to 7 °C).

    Note

    • To change the temperature mode from °F to °C (or vice versa) press and hold the Refrigerator and Freezer buttons simultaneously for approximately five seconds. The temperature indicator on the display window switches between Celsius and Fahrenheit.

    • The displayed temperature is the target temperature, and not the actual temperature of the refrigerator. The actual refrigerator temperature depends on the food inside the refrigerator.

  2. Water Filter

    Replace the water filter when the Water Filter indicator turns on. After replacing the water filter, press and hold the Water Filter button for three seconds to turn the indicator light off. Replace the water filter approximately every six months.

  3. Freezer

    Indicates the set temperature of the freezer compartment in Celsius (°C) or Fahrenheit (°F). The default freezer temperature is 0 °F (-18 °C). Press the Freezer button repeatedly to select a new set temperature from - 7 °F to 5 °F (-23 °C to -15 °C).

  4. Air Filter

    The air filter helps remove odors from the refrigerator.

    Note

    • Replace the air filter when the air filter indicator turns on. After replacing the air filter, press and hold the Air Filter button for 3 seconds to turn the indicator off. Replace the air filter approximately every six months.

  5. Smart Grid

    Press the Smart Grid button to turn the function On/Off. When the function is on, the indicator illuminates. The function automatically turns on when the refrigerator is connected to the Wi-Fi network. The Smart Grid function is only available if your electric utility company supports the function.

    When the refrigerator is responding to a Demand Response (DR) message from the electric company, the indicator blinks.

  6. Wi-Fi

    The Wi-Fi button, when used with the LG ThinQ application, allows the refrigerator to connect to a home Wi-Fi network. Refer to SMART FUNCTIONS for information on the initial setup of the application.

    The Wi-Fi indicator shows the status of the refrigerator's network connection. The indicator illuminates when the refrigerator is connected to the Wi-Fi network.

    Press and hold the Wi-Fi button for 3 seconds to connect to the network. The indicator blinks while the connection is being made, then turns on once the connection is successfully made.

  7. Ice Plus

    This function increases both ice making and freezing capabilities.

    • Press the Ice Plus button to illuminate the indicator and activate the function for 24 hours. The function automatically shuts off after 24 hours.

    • Stop the function manually by pressing the button once more.

  8. Cubed Ice

    Press the Cubed Ice button to turn the Cubed Ice icemaker on/off.

  9. Lock

    The lock function disables every other button on the display.

    • When power is initially connected to the refrigerator, the lock function is off.

    • To lock the control panel buttons, press and hold the Lock button until the indicator appears in the display and the function is activated.

    • To disable the function, press and hold the Lock button for approximately three seconds.

Note

Display Mode (For Store Use Only)

  • The Display Mode disables all cooling in the refrigerator and freezer sections to conserve energy while on display in a retail store. When activated, OFF is displayed on the control panel and the display remains on for 20 seconds.

    • To deactivate/activate the Display Mode:

      Open either refrigerator door. Press the Ice Plus button 3 times while pressing and holding the Refrigerator button. The control panel beeps and the temperature settings display to confirm that Display Mode is deactivated. Use the same procedure to activate Display Mode.