Control Panel Features

POWER On/Off ButtonPress this button to turn the washer on or off.After the cycle is complete, the power automatically turns off for purposes of safety and economy.If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.When power is connected again, the dishwasher will turn on automatically and resume the cycle.Displaye : Rinse Aid IconThis icon illuminates when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.Refer to the Rinse Aid Dispenser Adjustment section.a: Machine Clean & Sanitized IconThe Machine Clean icon flashes every 30 cycles. To activate or deactivate the icon, press the Delicate button for three seconds.If the High Temp. option is added to a cycle, the Machine Clean icon stays lit at the end of the cycle if the dishes were properly sanitized. (on some models)8:88 : Digital DisplayThe digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.The estimated time shown on the display does not include delay times for heating water, etc.If Delay Start is selected, the display shows the delay time in hours.Cycle time may vary depending on the soil level of your load.k, CL : Control LockThe Control Lock feature helps prevent settings from being changed during a cycle. Selecting this feature locks all of the buttons, except for the POWER button, on the control panel. This feature does not lock the door.While a cycle is running, press and hold Half Load and Energy Saver simultaneously for three seconds to activate or deactivate Control Lock.To start a new cycle, deactivate Control Lock.m : Night DryThis indicator lights up when Night Dry is selected.Chime On/Off ButtonTo activate or deactivate the button sounds, press and hold Dual Zone and Energy Saver simultaneously for three seconds. The error alert sound cannot be turned off.Cancel ButtonThe drain pump activates and the cycle cancels. Once the dishwasher finishes draining, the power turns off.Press and hold START for three seconds to activate.START ButtonTo operate the machine, either press START and close the door within four seconds or close the door and press START.If more than 4 seconds have passed since pressing START, an alarm will sound when the door is closed.