Releasing Drain Hose

Remove the twist tie holding the drain hose to the back of the shipping brace.

Removable Shipping Brace

The rear shipping brace can be removed if additional clearance is needed when installing the dishwasher under a low countertop.

Removing Lower Cover

If you lay the dishwasher on its back, do so carefully to avoid damaging the drain hose and the tub.Remove the screws at either side which attach the lower cover to the dishwasher. Remove the lower cover.If there is insulation padding behind the lower cover, remove it.Set the parts aside until the installation is complete.

Removing Packing Materials from the Interior

Remove all packing materials from the interior of the dishwasher before installing the appliance.

Attaching Installation Brackets

For countertops made of wood or other materials that will not be damaged by drilling, use the metal installation brackets provided.For countertops made of granite, marble, or other materials that could be damaged by drilling, use the wood screws to attach the dishwasher to the cabinet. See installation instructions in Securing Dishwasher to Cabinet Opening.Installation brackets and screws can be found in the silverware basket.Insert the tabbed end of the installation brackets into the slots in the upper frame. Rotate the brackets until the tabbed ends are facing up.Bend the tabs on the brackets to secure them to the frame using a pair of needle nose pliers.