Select a location as close to the sink as possible for easy connections to water supply line, drain hose and electrical connection.

To allow for proper clearance of plumbing and electrical, use the template included with the literature to determine the clearance on the side of the cabinet where the cabinet meets the back wall. Using a 2 1/2” diameter hole saw, drill a hole in the target area as shown on the template.

The opening must be at least 2 1/2" (63.5 mm) in diameter to prevent damage to the cables and hoses during installation.
Installation damage is not covered by the warranty, and leaks caused by improper installation may result in property damage.
Do not use existing holes unless they are in the target area.
Failure to properly locate the hole for the water and drain lines may prevent the dishwasher from installing flush with the cabinets and could result in kinked, pinched, crushed, stressed or damaged lines.
