Using a Standpipe to Drain

• Clip the end of the hose into the elbow bracket.

  • Connect the elbow bracket a within 4 inches (10 cm) of the end of the drain hose. If the drain hose is extended more than 4 inches (10 cm) beyond the end of the elbow bracket, mold or microorganisms could spread to the inside of the washer.

  

• Insert the end of the drain hose into the standpipe.

  

• Use the provided tie strap b to secure the drain hose in place.

  

• If the water valves and drain are built into the wall, fasten the drain hose to one of the water hoses with the provided tie strap c (ribbed side on inside).