Check if the washer is properly installed and run a test cycle.
Load the washer with 6 thick bath towels (approximately 6 pounds).
Press the Power button.
Press the Rinse+Spin button.
Press the Start/Pause button to start the wash cycle.
Make sure that water is supplied, that the washer does not rock or vibrate excessively, and that it drains well during the spin cycle.
If water leaks during water supply, see Connecting the Water Inlet Hoses to connect them properly.
If the washer rocks and vibrates excessively, see Leveling the Washer to level it again.
If the drain does not work, see Connecting the Drain Hose to install the hose properly.