Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

*1

This feature is only available on some models.

Type A

Type B

  1. Freezer

    Press this button repeatedly to select a desired temperature between -21 7 and -13 7.

    • The default freezer temperature is -18 7.

  2. Fridge

    Press this button repeatedly to select a desired temperature between 1 7 and 8 7.

    • The default fridge temperature is 3 7.

  3. Express Frz.

    This function can quickly freeze a large amount of ice or frozen foods.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  4. Door Alarm

    The alarm sounds if the door is left open or not completely closed. Press this button to deactivate/activate the door alarm function.

  5. Lock*1

    The lock function disables every other button on the display.

    • To lock the control panel buttons, press and hold the Lock button for 3 seconds until the k icon appears and the function is activated.

    • To disable the function, press and hold the Lock button for 3 seconds until the l icon appears and the function is deactivated.

    Note

    • The Lock function does not disable the dispenser operation.

  6. Water Filter*1

    Replace the water filter when the h icon turns on. After replacing the water filter, press and hold the Water Filter button for three seconds to turn the icon light off. Replace the water filter approximately every six months.

  7. Light*1

    When dispensing water, a light underneath the water dispenser will illuminate.

    Press the Light button to turn the light on or off.

Note

  • For optimal food preservation, increasing or decreasing 1 °C from the default temperature is recommended for each compartment.

  • The displayed temperature is the target temperature, and not the actual temperature inside the appliance.

  • The actual temperature inside the appliance depends on the following factors: room temperature, the amount of food and how often the doors are opened, where the appliance is. Set the temperatures by considering these factors.

  • The control panel automatically turns off for energy saving.

  • When the appliance is in the energy saving mode, the display remains off until a door is opened or a button is pressed. Once on, the display remains on for 20 seconds.

  • If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.