Removing/Refitting the Humidity Controlled Crispers

• Open the doors completely and remove the contents of the Door-in-Door case. Lift up and pull out the Door-in-Door case.

  Note

  • The Door-in-Door feature is only available on some models.

  

• Pull out the crisper to full extension, lift the front up, and pull straight out.

  

• Lift the front of the cover up with both hands until it detaches from the back wall of the cabinet, then pull it out.

  

• To refit, insert the cover into the refrigerator with both hands and lower it onto the guides.

  

• Slightly tilt up the front, insert the crisper into the frame and push it back into place.

  

• Line up the tabs on the Door-in-Door case with the slots on the door and push down until it snaps into place.

  Note

  • The Door-in-Door feature is only available on some models.