Use this function to delay ending time. The appliance will start automatically and finish after a specified time interval.
Press the POWER button.
Select a washing programme.
Press the Time Delay button to set the required delay ending time.
Press the START/PAUSE button.
This function is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, wash laundry and other factors.
Reservation can be made up to 18 hours;
1 hour interval up to 3 - 12 hours
2 hours interval up to 12 - 18 hours
This function cannot be set for less than 3 hours.
To cancel this function, press Time Delay button repeatedly until the reservation is cancelled or press the POWER button to turn off and on power.
This option can be selected to wash heavily soiled clothes by soaking them in water for some time to loosen dirt and grime.
When this option is activated, the u icon is lit.
To activate this option, press the Soak button.
To change the soak time on the display or deactivate this option, press the Soak button while this option is activated.
While the Turbo Wash option is activated, the Soak option can not be set even if the Soak button is pressed.
Press the Hot Wash and/or Cold Wash buttons to select hot water, cold water, or hot and cold water (warm water).
If Hot Wash is selected, washing will be done with hot water and rinse will be done with cold water.
Under normal and standard user environments, warm water will enter the drum when both hot water and cold water are selected.
It can be changed during operation.
Allergy Care programme has higher set temperature. So this programme uses more hot water than other programmes.
Both Hot Wash and Cold Wash buttons are automatically selected under the Allergy Care, Smart Rinse, and Tub Clean programmes.