Restoring the Previous Settings
When the air conditioner is turned on again after a power failure, Auto Restart function restores the previous settings.
When using the appliance for the first time, Auto Restart function is set. You can cancel and set this function by pressing the Power button a on the indoor unit.
Cancelling Auto Restart
Open the up-down vane (Type 1) or front cover (Type 2).
Press and hold the Power button a for 6 seconds.
When the appliance beeps twice, release the Power button a. The lamp will flash twice. This repeats 4 times.
Setting Auto Restart
Open the up-down vane (Type 1) or front cover (Type 2).
Press and hold the Power button a for 6 seconds.
When the appliance beeps twice, release the Power button a. The lamp will flash. This repeats 4 times.
Type 1
Type 2
The feature may change depending on the model type.
If you press and hold the Power button a for 3 – 5 seconds, instead of 6 seconds, the appliance will switch to the test operation. In the test operation, the appliance blows out strong cooling air for 18 minutes and then returns to factory default settings.