Contact an authorized service centre when installing or relocating the air conditioner.
Do not install the air conditioner on an unstable surface or in a place where there is danger of it falling.
Do not install the unit in potentially explosive atmospheres.
Do not install the air conditioner in a place where flammable liquids or gases such as gasoline, propane, paint thinner, etc., are stored.
Install the panel and the cover of the control box safely.
Install a dedicated electric outlet and circuit breaker before using the air conditioner.
Use standard circuit breaker and fuse that conform to the rating of the air conditioner.
Make sure that the pipe and the power cable connecting the indoor and outdoor units are not pulled too tight when installing the air conditioner.
The indoor/outdoor wiring connections must be secured tightly, and the cable should be routed properly so that there is no force pulling the cable from the connection terminals. Improper or loose connections can generate heat or cause a fire.
Do not connect the ground wire to a gas pipe, a lightning rod, or a telephone ground wire.
Use non-flammable gas (nitrogen) to check for leaks and to purge air; using compressed air or flammable gas may cause fire or explosion.