Top > MAINTENANCE > Cleaning > Using Auto Clean+ Function

Using Auto Clean+ Function

In the Cooling and Dehumidification modes, moisture is generated inside the indoor unit. You can reduce that moisture.

  • Turn the appliance on.

  • Press and hold the Comfort button for about 3 seconds.

Note

  • The Auto Clean+ function is set up when you purchased the appliance. If you don't want to use this function, turn it off.

  • The Auto Clean+ time is automatically set according to the appliance usage conditions, and the progress status is displayed as the remaining minutes on the indoor unit display.

    • The Auto Clean+ time is up to 20 minutes.

  • The drying condition inside the appliance may be different depending on the temperature or humidity of the indoor air.

    • To most effectively dry the inside of the appliance, operate the appliance in Fan mode for more than 1 hour.

  • Once the Auto Clean+ function is set, it remains enabled until turned off.

  • If the appliance will not be used for a long period of time, run Fan mode for more than 1 hour to completely dry the inside of the appliance before storing it.

  • You can set the Auto Clean+ function even when the appliance is not operating.