Settings (Hour Mode, Convection Auto Conversion, Calibrating the Oven Temperature, Preheat Alarm Light, Beeper Volume, Fahrenheit or Celsius, Wi-Fi On/Off, Cooktop on Alert Volume)
Press and hold the Clock button for 3 seconds. Then press the Clock button repeatedly to toggle through and change oven settings.
The Settings key allows you to:
set the hour mode on the clock (12 or 24 hours)
enable/disable convection auto conversion
adjust the oven temperature
activate/deactivate the preheating alarm light
set the beeper volume
switch the temperature scale between Fahrenheit and Celsius
activate/deactivate the Wi-Fi
set the cooktop on alert volume
Setting the Hour Mode
The control is set to use a 12-hour clock. To reset the clock to 24-hour mode, follow the steps below.
Press and hold Clock button for 3 seconds.
Press +/- to toggle between a 12-hour and 24-hour clock.
Press START to accept the change.
Setting Convection Auto Conversion
When Conv. Bake and Conv. Roast are selected, Convection Auto Conversion automatically converts the standard recipe temperature entered to a convection temperature by subtracting 14 °C. This auto-converted temperature shows on the display. For example, select Conv. Bake, enter 175 °C, and 160 °C shows on the display after preheat.
Convection Auto Conversion is enabled by default. To change the setting, follow these instructions.
Press and hold the Clock button for 3 seconds.
Press Clock repeatedly until Avto appears in the display.
Press +/- button to switch Auto Conversion on or off.
Press START to accept the change.
Adjusting the Oven Thermostat
Your new oven may cook differently from the one it replaced. Use your new oven for a few weeks to become more familiar with it before changing the temperature settings. If after familiarizing yourself with the new oven, you still think that it is too hot or too cold, you can adjust the oven thermostat yourself.
To begin, either raise or lower the thermostat 8 °C. Try the oven with the new setting. If the oven still needs adjustment, raise or lower the thermostat again, using the first adjustment as a gauge. For example, if the adjustment was too much, raise or lower the thermostat 5 °C. If the adjustment was not enough, raise or lower the thermostat 12 °C. Proceed in this way until the oven is adjusted to your satisfaction.
Press and hold the Clock button for 3 seconds. Press Clock repeatedly until AdJU appears in the display.
Press or press and hold the +/- buttons until the desired number of degrees appears in the display.
Press START to accept the change.
This adjustment does not affect the broiling or Self Clean temperatures. The adjustment is retained in memory after a power failure. The oven temperature can be increased (+) or decreased (-) as much as 19 °C.
Once the temperature is increased or decreased, the display shows the adjusted temperature until it readjusts.
Turning the Preheat Alarm Light On/Off
When the oven reaches its set-temperature, the preheating alarm light flashes 5 times or until the oven door is opened.
You can activate or deactivate the preheating alarm light.
Press and hold Clock button for 3 seconds. Then press Clock repeatedly until PrE appears in the display.
Press +/- to turn the light on/off.
Press START to accept the change.
Adjusting the Beeper Volume
Press and hold Clock button for 3 seconds. Then press Clock repeatedly until bEEP appears in the display.
Press +/- to select Hi, Lo or OFF.
Press START to accept the change.
Selecting Fahrenheit or Celsius
Set the oven temperature display to show either Fahrenheit (°F) or Celsius (°C) units. The oven defaults to Fahrenheit unless changed by the user.
Press and hold Clock button for 3 seconds. Then press Clock repeatedly until UNit appears in the display.
Press +/- to select F (Fahrenheit) or C (Celsius).
Press START to accept the change.
Turning the Wi-Fi On/Off
You can turn the Wi-Fi transmitter on the PCB on or off.
Press and hold Clock button for 3 seconds. Then press Clock repeatedly until Wi-Fi appears in the display.
Press +/- to turn the Wi-Fi transmitter on/off.
Press START to accept the change.
Adjusting Cooktop On Alert Volume
Press and hold Clock button for 3 seconds. Then press Clock repeatedly until CtOP appears in the display.
Press +/- to select Hi, Lo, OFF.
Press START to accept the change.