When you need a wash+rinse+spin, spin only, rinse+spin, rinse only, wash+rinse, wash only cycle, these can be set manually.
Press the Process button to select wash, rinse and spin options as desired.
Press the POWER button.
Press the Process button until the LED lights up.
When you select a programme, the number indicates programme.
Press the Water button to adjust the water level according to the amount of laundry.
Add laundry into the drum.
Add the detergent into the detergent dispenser and close the door.
Press the START/PAUSE button to start the cycle(s).
When you set a washing cycle manually such as rinse only, wash only or wash and rinse, the water will not be drained out after the wash is completed. If you wish to drain the water, select a spin only cycle after the wash has completed.
If a rinse only cycle is selected, the water supply is started after detecting the load and this cycle will start. However this cycle will start to supply water of the selected water level if there is already water in the drum.
If you do not select or change the Water, the water level will be set automatically.