The dispenser has five adjustment levels. The default programme is rinse aid level 2. This can be checked and altered by using the buttons on the control panel.
Ensure the appliance is off.
Press Power and Dual Zone simultaneously to check the current setting.
Press Delay Start to change the rinse aid dispenser setting. Each press of the button changes the setting one step from L0(off) to L4.
Once the desired rinse aid dispenser setting is selected, press START to save.
The power turns off after saving.
If the rinse aid lid is not closed properly, a large amount of rinse aid will release into the tub and cause washability problems.
The Rinse Aid Refill e icon will illuminate when more rinse aid is needed.
If you notice cloudy spots, streaks or water marks on the glassware after washing, increase the setting level.
Setting the control too high can cause foaming, which will cause poor wash results.
If the glass is smeared or foam is present on the bottom, decrease the level setting.
Setting the rinse aid control too low can cause spotting and streaking on dishes and poor drying results.