Operation Overview

• Sort laundry and load the washer.

  • Sort laundry by fabric type, soil level, color and load size as needed. Open the door and load items into the washer.

  • If using single-use detergent packs, or gel or tablet detergents, place them in the drum before loading the laundry.

• Add cleaning products.

  • Add the proper amount of HE (High-Efficiency) detergent to the detergent dispenser.

  • If desired, add bleach or fabric softener to the appropriate areas of the dispenser drawer.

  • Do not place liquid or powdered detergent packs, or gel or tablet detergents in the dispenser.

• Turn on the washer.

  • Press the Power button to turn on the washer.

• Select a cycle.

  • Turn the cycle selector knob or press the cycle buttons to select the desired cycle.

  • The preset wash temperature, spin speed, soil level and option settings for the selected cycle are shown.

  • The Normal cycle must be selected in order to change its default settings.

  • Pressing the Start/Pause button without selecting a cycle immediately starts the Normal cycle with the default settings.

• Adjust settings.

  • Default settings for the selected cycle can be changed, if desired, using the cycle modifier and option buttons.

  • Not all modifiers and options are available on all cycles. A different chime sounds and the LED does not light up if the selection is not allowed.

• Begin cycle.

  • Press the Start/Pause button to begin the cycle. The door locks, and the washer agitates briefly without water to measure the weight of the load.

  • If the Start/Pause button is not pressed within a certain time, the washer shuts off and all settings are lost.

• End of cycle.

  • When the cycle is finished, a melody sounds. Immediately remove the clothing from the washer to reduce wrinkling.

  • Check around the door seal when removing the load for small items that may be caught in the seal.