Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

*1

This feature is only available on some models.

  1. Super Freeze

    This function can quickly freeze a large amount of ice or frozen foods.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  2. Freezer

    Press this button repeatedly to select a desired temperature between -23 ℃ and -15 ℃.

    • The default freezer temperature is -18 ℃.

  3. Fridge

    Press this button repeatedly to select a desired temperature between 1 ℃ and 7 ℃.

    • The default fridge temperature is 3 °C.

    Note

    • The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

  4. Self Care*1

    UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes every hour or can be manually activated at anytime.

    Press this button to activate it manually.

    Note

    • This function will momentarily stop each time the dispenser paddle is pressed if it is in operation and will resume the function after 1 hour.

    • This function runs automatically for 10 minutes every hour without pressing the Self Care button.

    • UVnano is a compound word derived from the words UV and its unit, nanometer.

  5. Ice On*1

    Press and hold the Ice On button for three seconds to turn the automatic icemaker On/Off.

  6. Water Filter*1

    Replace the water filter when the indicator lights up.

  7. Wi-Fi

    This button allows the appliance to connect to a home Wi-Fi network. Refer to Smart Functions for information on the initial setup of the LG ThinQ application.

  8. Non Plumbing*1

    The Non Plumbing icon is illuminated when the water tank is installed correctly.

  9. Air Filter*1

    This function reduces odours inside the fridge. If the indicator lights up, replace the filter.

  10. Water Dispenser*1

    Select the premeasured amounts of water. You can select 250ml, 500ml, or 1L. Press the dispenser paddle with a glass or other container.

Note

  • If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.

  • For optimal food preservation, increasing or decreasing 1 ℃ from the default temperature is recommended for each compartment.

  • The displayed temperature is the target temperature, and not the actual temperature of the appliance. The actual appliance temperature depends on the food inside the appliance.

  • The actual temperature inside the appliance depends on the following factors: room temperature, the amount of food and how often the doors are opened, where the appliance is. Set the temperatures by considering these factors.