Top > OPERATION > Auto Cooking Mode > Installing the Rotisserie

Installing the Rotisserie

  • Insert the shaft of right plate into the shaft of motor.

  • Put the shaft of left plate on the holder of rotisserie.

Note

  • After cooking, hold the rotisserie bar of both side with the handle and lift up the left end lightly and pull out from the right end.

    1. Metal Tray

    2. Handle

  • The rotisserie cooking is convenient for grilling of meat and poultry. All the surface of the food will become even brown without overturning.

  • The rotisserie bar is used for rotisserie cooking only. After rotisserie cooking is finished remove the rotisserie bar and store with other accessories.

Caution

  • To Clean Rotisserie and Metal Tray

    • When cooking is completed, separate the Rotisserie from the food. Take care when handling Rotisserie, Metal Tray and food stuff as it is very hot.

    • During cooking it is normal for the Rotisserie & metal tray to be stained from the food. Simply clean the Rotisserie and Metal Tray with a warm soapy water and a soft cloth. If the Rotisserie and Metal Tray remain stained after washing, soak utensils in hot soapy water for a few minutes.

    • Do not use metal scouring pads. They will scratch the surface.

  • DO NOT USE THE ROTISSERIE WITH NO LOAD, IT WILL DAMAGE THE OVEN.

  • AFTER COOKING, THE METAL TRAY WILL BECOME EXTREMELY HOT.

  • It is recommended to remove the grease from the turntable every time before cooking. Hot grease on the turntable may cause smoke.