Using the Flexible Zone

This option adjusts the wash intensity to target different zones inside the dishwasher. Set it to wash just the upper rack or lower rack, or set the intensity to soft for the upper spray arm and strong for the lower spray arm.The Flex Zone is off by default. Press the Flex Zone button to customize settings.Press the Flex Zone button repeatedly to select the 4 modes for cleaning the dishes.ModeDescriptionSmall loads & light soilUse just the upper rack to save energy and time.Small loads & heavy soilUse just the lower rack to save energy and time.Small loads & heavy soil & light/sensitive dishesFocus on lower rack, but also operate lightly to wash some light or sensitive dishes in the upper rack.Various conditionsPlace heavily soiled dishes like plates and bowls in the lower rack and lightly soiled dishes like cups and small plates in the upper rack to get the best results.

High Temp.

Raises the main wash temperature to improve cleaning.If the High Temp. option is added to a cycle, the indicator a stays lit at the end of the cycle if the dishes were properly sanitized. If the dishwasher could not properly sanitize the dishes because the High Temp. option was not selected, the cycle was interrupted or the water could not be heated to the required temperature, the indicator will not light up at the end of the cycle. Open and close the door or press POWER to turn the indicator off.This high temperature rinse sanitizes dishes and glassware in accordance with the NSF/ANSI Standard 184 for residential dishwashers. Certified residential dishwashers are not intended for use in licensed food establishments. Only sanitizing cycles have been designed to meet the requirements for soil removal and sanitization efficacy. There is no intention, either directly or indirectly, that all cycles on a certified machine have passed the sanitization performance test.

Extra Dry

Select the Extra Dry option for better drying performance. This option adds extra drying time to the cycle and raises the heated rinse temperature.When the rinse aid is empty, the Extra Dry option is selected automatically.

Night Dry

Dishes are often left in the dishwasher overnight after the cycle ends. This can result in the steam inside the tub condensing on dishes, leaving them wet. This option runs the ventilation fan periodically to help vent the steam from the tub.Press and hold Extra Dry for three seconds to activate.The Night Dry option is selected by default for all cycles for which it is available, except the Normal cycle.To add the Night Dry option to the Normal cycle, press and hold Extra Dry for 3 seconds.

Delay Start

This feature delays the start of a selected cycle. Each time the Delay Start button is pressed, the delay time increases by an hour. The delay time can be set from 1 to 12 hours, in one-hour increments.

Cycle/Option Guide

The cycle guide below shows the available options for each cycle.CycleAutoNormalHeavyTurboMachine CleanSoil LevelAll levelsAll levelsHeavyHeavyWater Usage(L)13.8 - 18.19.2 - 19.526.927.512.3(gal)3.6 - 4.82.4 - 5.27.17.33.2Wash Time with Options (Mins.)90 - 20399 - 191141 - 21660 - 12182Available OptionsFlex Zone####*High Temp.####Extra Dry####Night Dry#**##**#**Delay Start#####* Some Flex Zone modes cannot be selected when using the Turbo cycle.** Default settingActual water consumption will vary depending on soil level and hardness of water.The actual running time and cycle time displayed may change depending on options chosen, soil level, water temperature, and hardness of water. Therefore, display time and actual running time can be different.