Installing the Cooktop Unit
Locate the electrical outlet and gas shut-off valve in the cabinet beneath the cooktop. The access cap on the gas regulator must face the front of the cabinet and be easily accessible.
Never reuse old flexible connectors.
Install a manual shut-off valve b in the gas line in an easily accessible location outside the cooktop. Be sure you know how and where to shut off the gas supply to the cooktop. Install the electrical outlet 12˝ a below the countertop.
Carefully lower the cooktop into the countertop cutout, making sure not to trap any wires.
Remove the retainer brackets from the literature package.
Install the retainer brackets a to the bottom of the cooktop unit c. then snug the screws b against the bottom of the countertop d as shown.
The retainer brackets MUST be installed to meet local codes or, in their absence, the National Electrical Code ANSI/NFPA No. 70, latest edition.
Install one retainer bracket on each side.
Insert the screw through the center slot on the bracket into either of the 2 screw holes on the side of the product.