Using Live Playback (Real-time Playback)
It is a function you can use to temporarily save the programme you are currently watching to a USB HDD, so you can play back any scenes you might miss while watching TV. This function allows you to continue watching from where you were previously if you go out for a while.
  1. Input the USB HDD in the USB port.
  2. Press the START LIVE PLAYBACK button left corner of the screen.
  3. During watch the live broadcast, select a point on the progress bar which you want by the pointer. You can also press the LeftLeft / RightRight buttons on your Remote Control to use this feature.
    Select a previous point than the current point on the progress bar.

Live PlaybackLive Playback

Select a device to be used with Live Playback when two or more USB HDDs are connected to the TV.
You cannot use a USB stick. Connect a USB HDD with 80 GB or more of total storage.
If there is not enough remaining space in the USB HDD device, Live Playback may not work properly. To use Live Playback function, you need the USB HDD which has at least 2.3 GB.
It can be used in analogue or digital broadcasting and in Input mode. However, you cannot use this option while listening to a radio programme.
(This feature is available on certain models only.)
Programmes connected to the COMPONENT IN and HDMI IN are not supported Live Playback.
(COMPONENT IN port is available in certain models only.)
With the Live Playback function, you can play a programme back for up to two hours depending on remaining USB HDD capacity. This time may vary depending on your region.
The videos saved in Live Playback mode are deleted if you turn off the TV without recording them.