Top > OPERATION > Control Panel > Control Panel and Functions

Control Panel and Functions

  1. Express Frz.

    This function can quickly freeze a large amount of ice or frozen foods.

    • This function is enabled and disabled in turn each time you press the button.

    • This function automatically terminates after a specific period has passed.

  2. Wi-Fi

    This button allows the appliance to connect to a home Wi-Fi network. Refer to Smart Functions for information on the initial setup of the LG ThinQ application.

  3. Freezer

    Press this button repeatedly to select a desired temperature between -23 °C and -15 °C.

    • The default freezer temperature is -18 °C.

  4. Fridge

    Press this button repeatedly to select a desired temperature between 1 °C and 7 °C.

    • The default fridge temperature is 3 °C.

  5. Self Care

    UV light is used to keep the water outlet clean. UV clean function runs automatically for 10 minutes every hour or can be manually activated at anytime.

    Press this button to activate it manually.

    Note

    • This function will momentarily stop each time the Water button is pressed if it is in operation and will resume the function after 1 hour.

    • This function runs automatically for 10 minutes every hour without pressing the Self Care button.

    • UVnano is a compound word derived from the words UV and its unit, nanometer.

  6. Lock

    This locks buttons on the control panel.

    • To lock the control panel buttons, press and hold the Lock button for 3 seconds until the k icon appears and the function is activated.

    • To disable the function, press and hold the Lock button for 3 seconds until the l icon appears and the function is deactivated.

    Note

    • The Lock function does not disable the dispenser operation.

  7. Water Filter

    Replace the water filter when the h indicator lights up.

  8. Water & Ice Type

    Select a desired dispenser mode from the buttons on the control panel. Press the dispenser switch with a glass or other container to dispense cubed ice, water or crushed ice.

Note

  • The control panel automatically turns off for energy saving.

  • The actual inner temperature varies depending on the food status, as the indicated setting temperature is a target temperature, not actual temperature within the appliance.

  • For optimal food preservation, increasing or decreasing 1 ℃ from the default temperature is recommended for each compartment.

  • When the appliance is in the energy saving mode, the display remains off until a door is opened or a button is pressed. Once on, the display remains on for 20 seconds.

  • If there is any finger or skin contacts to the control panel while cleaning it, the button function may operate.