Using Live Playback
It is a function you can use to temporarily save the program you are currently watching to a USB HDD, so you can play back any scenes you might miss while watching TV. This function allows you to continue watching from where you were previously if you go out for a while.
- Input the USB HDD in the USB port.
- Set to On the Live Playback.
- When watching a live broadcast, use the pointer to select a point on the progress bar where you want to resume watching.
Select a previous point than the current point on the progress bar.
Select a device to be used with Live Playback when two or more USB HDDs are connected to the TV.
You cannot use a USB flash drive. Connect a USB HDD with 80 GB or more of total storage.
If there is not enough remaining space in the USB HDD, Live Playback may not work properly. To use Live Playback function, you need a USB HDD which has at least 1 GByte.
[Depending upon model]
It can be used in analog or digital broadcasting and in Input mode.
It can be used in analog or digital broadcasting and in Input mode.
With the Live Playback function, you can play a program back for up to two hours.
Set to On the Save the live playback in the Live Playback Setting. (After turning on the Live Playback, please stay for 90 seconds.)
If the Live Playback storage setting is turned on, a maximum of two hours of content will be saved even when the TV is turned off and back on. When the TV is turned off and back on, the saved content resumes playing.
If the Live Playback storage setting is turned on, a maximum of two hours of content will be saved even when the TV is turned off and back on. When the TV is turned off and back on, the saved content resumes playing.
For some Ultra HD models, if the Live Playback function is in use for an analog channel, you cannot select the buffering section of the programs broadcast in Ultra HD. (The channel will be switched to the current program being broadcast when you try to select the section.)