Top > OPERATION > Control Panel > Control Panel Features

Control Panel Features

For Non-Steam Models

  1. Power

    • Press Power button to turn power on and off.

    • After the cycle is complete, the power automatically turns off for purposes of safety and economy.

    • If there is a power surge, power outage, or disruption of any kind, power is automatically turned off for safety.

    • When power is connected again, it will turn on automatically and resume the cycle.

  2. Display

    • 8:88 : Digital Display

      • The digital display on the control panel shows the ESTIMATED cycle time. When the cycle and options are selected, the display shows the total estimated time to complete those selections. During operation, the display shows the remaining estimated operating time.

      • The estimated time shown on the display does not include delay times for heating water, etc.

      • If Delay Start is selected, the display shows the delay time in hours.

      • The Auto cycle time may vary depending on the soil level of your load.

    • e : Rinse Aid Icon

      • This icon flashes when the rinse aid level is low. The LED automatically shuts off when the rinse aid is refilled or the level is set to 0.

    • a : Machine Clean Icon

      • This icon flashes after every 30 cycles.

      • To activate or deactivate the icon, press the Machine Clean button for 3 seconds.

    • k : Control Lock Icon

      • This icon illuminates when the control lock feature is activated.

    • n : Salt Refill Icon

      • This icon flashes when the salt level is low. The LED automatically shuts off when the salt is refilled.

  3. Chime On/Off

    • To activate or deactivate the button sounds, press and hold Half Load and Extra Dry simultaneously for 3 seconds. The error alert sound cannot be turned off.

  4. Cancel

    • The drain pump activates and the cycle cancels. Once the appliance finishes draining, the power turns off.

    • Press and hold START button for 3 seconds to activate the cancel function.

  5. START

    • To operate the appliance, either (depending on display type) press START button and close the door or close the door and press START button.

    • If START button is not pressed to start the cycle within 4 minutes, the power will automatically turn off.