Customising a Washing Programme

Each programme has default settings that are selected automatically. You may also customise these settings using these buttons.This button selects the wash temperature for the selected programme. Press the Temp. button until the desired temperature shows on the display.Select the water temperature suitable for the type of load you are washing. Follow the garment fabric care labels for best results. The spin intensity level can be selected by pressing this button repeatedly.Press the Spin button to select spin speed.If O of the spin level is selected, the drum of the washing machine will rotate before the drainage.Prepare the clothes and load the drum.Press the Power button.Add detergent.Select a washing programme.Customise the washing programme (Temp. or Spin) as necessary.Press the Start/Pause button.Prepare the clothes and load the drum.Press the Power button.Do not select a washing programme and do not add a detergent.Press the Spin button.Press the Start/Pause button.If you select the washing programme, you will be unable to select a spin only. If this occurs, press Power button twice to cycle the machine off and back on.

Using Basic Options

You can customize the programmes by using the following basic options:This option is recommended when washing a heavily soiled load.Press the Power button.Select a washing programme.Press and hold the Delay End button for 3 seconds.Press the Start/Pause button.You can set this function so that the appliance starts automatically and finishes after a specified time interval.Press the Power button.Select a washing programme.Press the Delay End button as necessary.Press the Start/Pause button.Except for LED of the Delay End button, all LEDs on the control panel will be turned off within 20 minutes. This feature may vary depending on the model purchased.The delay time is the time to the end of the programme, not the start. The actual running time may vary due to water temperature, clothes and other factors.To cancel the function, the Power button should be pressed.Avoid using liquid detergent for this function.

Settings

Use this option to disable the controls. This function can prevent children from changing cycles or operating the appliance.Once this function is set, all buttons are locked except the Power button.When the controls are locked, CL and the remaining time are alternatively shown on the display during the wash while this function is engaged.Turning off the power will not reset this function. You must deactivate this function before you can access any other functions.Turn on the power.Press and hold the Spin and Temp. buttons at the same time for 3 seconds to activate this function.A beeper will sound, and CL will appear on the display.Turn on the power.Press and hold the Spin and Temp. buttons at the same time for 3 seconds to deactivate this function.