You can customize the programmes by using the following special options:
Use this programme to wash clothes by filling water manually in the machine from an external source.
To activate Manual Fill, press and hold Water button for 3 seconds.
Put clothes inside the tub and machine will sense the load.
When the Manual Fill icon blinks with a beep sound, fill water until beep sound stops and the dE error is shown on the display.
Press the START/PAUSE button to start wash cycle and repeats same 2 times for rinse cycle.
Use this programme to reuse the water for second round of wash load. Water will not drain at the end of cycle and can be re-used for washing another lot.
Do not keep water hold for long time after the end of cycle. This may cause bad odour and damage the laundry.
Spin function cannot be done in Aqua Reserve wash programme.
Use this programme for rinse laundry with clean water and spin it to remove moisture.
Wash function cannot be done in Rinse+Spin programme.
Use this programme to reduce drying time by minimizing the moisture that remains within the clothes.
To activate Turbo Spin press and hold Spin for 3 seconds.
Long press 1 time for 15 min turbo spin and long press 2 times for 30 min turbo spin
Press the POWER button.
To use special options, press Water level, Wash, Rinse or Spin button.
Manual Fill
Press and hold Water button for 3 seconds.
Aqua Reserve
Press and hold Wash button for 3 seconds.
Rinse+Spin
Press and hold Rinse button for 3 seconds.
Turbo Spin
Press and hold Spin button for 3 seconds.
Press the START/PAUSE button.