Top > TROUBLESHOOTING > Before Calling for Service > Parts & Features

Parts & Features

Oven light does not work.

Cause

It is time to replace the lamp or the lamp is loose.

Solution
  • Replace or tighten lamp. See "Changing the Oven Light" section in this Owner’s Manual.

Cause

The plug on the range is not completely inserted in the electrical outlet.

Solution
  • Make sure the electrical plug is inserted into a live, properly grounded outlet.

Range is not level.

Cause

Poor installation.

Solution
  • Place oven rack in center of oven. Place a level on the oven rack. Adjust leveling legs at base of range until the oven rack is level.

  • Be sure floor is level and strong and stable enough to adequately support range.

Cause

Kitchen cabinet alignment may make range appear unlevel.

Solution
  • Be sure cabinets are square and have sufficient room for range clearance.

Cannot move appliance easily. Appliance must be accessible for service.

Cause

Cabinets not square or are built in too tightly.

Solution
  • Contact builder or installer to make appliance accessible.

Cause

Carpet interferes with range.

Solution
  • Provide sufficient space so range can be lifted over carpet.